Facebook Twitter Google Linkedin
Tel: +86-20-82524180
E-mail: sales@electric-forkliftparts.com
Home > News > Content
The Ignition Switch Is An Important Part Of The Machine Car
- Jun 07, 2017 -

The ignition switch is generally equipped with 0 or LOCK, I or ACC, II or ON, III or START four positions.

The ignition switch goes to the III or START position and the starter starts. Ignition Switch Ignition switch to I or ACC position, the engine is off, other vehicles can be used normally.

Ignition switch to II or ON position, the engine is working.

The ignition switch goes to 0 or LOCK position, the engine turns off, and the steering wheel is locked when the key is pulled out.

Ignition switch: the ignition system switch (usually use the key), can be free to open or close the main circuit of the ignition coil, but also for other electrical circuits.

Ignition switch type: gas lighters, gas stoves, gas water heater ignition switch; car, Ignition Switch motorcycle start and ignition switch; launch missiles, satellites, all kinds of spacecraft ignition switch.

Common ignition switch ignition: ignition methods are mainly piezoelectric ceramic ignition and power coil ignition.

The four states of the ignition switch and the correct operation method

Lock the car after the key will be in the LOCK state, this time the key door not only locked the direction, while cutting off the whole car power.

ACC state is connected to the car part of the electrical equipment, such as CD, Ignition Switch air conditioning and so on.

Normal driving when the key is in the state, then all the cars are in the working state of the circuit.

START file is the engine start gear, after the start will automatically return to normal state is ON file.

The four stalls each gear are progressive, the purpose is to let the electrical equipment one by one into the working state, which can also ease the power caused by the instantaneous car battery burden. If the car in the other stalls do not stay, from the LOCK directly into the START start state, will instantly increase the battery load, and because the electrical equipment has not yet fully into the working state, the computer is difficult to normally command the engine to start, so this The operation of the battery and the engine are very unfavorable. Ignition Switch Often this operation will shorten the battery life, will cause the engine to start difficult to promote the generation of coke!

Correct method:

The key into the ignition switch, in each stall to do instantly stay about 1, 2 seconds, then you should be able to hear the sound of electrical appliances at all levels of electricity, and then into the next gear on it!